Skip to content
Menu
Hangzhou Minghong Electronic Technology Co., Ltd.
  • Products
  • DP-666
  • NanoVNA-F
  • RF Demo Kit
  • Support
  • 中文站点
Hangzhou Minghong Electronic Technology Co., Ltd.

DeepSDR 101 Product Release

Posted on 2022-08-042024-08-24

DeepSDR SDR Radio Software Defined Radio DSP Digital Demodulation Shortwave CW SSB AM FM Broadcast Receiver
Buy Now !

This product realizes frequency mixing based on the Tayloe Quadrature Product Detector method. The clock generator Si5351 generates two quadrature square wave signals with variable frequency as excitation, and realizes an ultra-low noise ZIF zero-IF receiver. The IQ signal obtained after mixing is output to the CODEC and collected by the MCU, and the DSP algorithm in the MCU completes the demodulation and display of the signal.
Tayloe mixer references:
Ultra Low Noise, High Performance, Zero IF Quadrature Product Detector and Preamplifier
http://www.norcalqrp.org/files/Tayloe_mixer_x3a.pdf
DeepSDR 101 Product Manual Download
DeepSDR 101 Quick Start Guide Download
DEEPELEC Youtube Video

Product description

DeepSDR 101 is a DSP digital demodulation radio based on SDR software-defined radio architecture. It has a 192kHz width spectrogram and waterfall display capabilities, and cooperates with 16bit sampling to realize a high dynamic receiver with CW, AM, SSB, FM demodulation functions. The whole machine adopts an all-aluminum alloy CNC shell, with a 4.3-inch 800x480 resolution high-brightness IPS LCD display, while maintaining a compact and compact body.
Immediately take it to the outdoors, enjoy the natural scenery and the fun of listening anytime, anywhere!

Basic parameters

Display technology:  4.3-inch IPS 800x480 resolution DC dimming bright LCD
Control method:    resistive touch screen + rotary encoder
Frequency range:   100k – 149MHz
Working mode:    CW, AM, SSB single sideband (LSB/USB), WFM, FM broadcast stereo (requires earphones)
Step frequency:    1Hz/10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
Spectral bandwidth:  192kHz, 128kHz, 64kHz, FFT real-time spectrum display
Antenna interface:   BNC male, impedance 50Ω, maximum input power -20dBm
Reference crystal:   TCXO 26MHz ±0.5ppm
Audio interface:    support ordinary 3.5mm earphone or CTIA (American Standard) interface earphone
Speaker power:    maximum 3W, 4Ω multimedia speaker
Charging port:    USB Type-C, 5.0V/2A
Current consumption: about 250mA @ 5V
Battery capacity:    5000mAh/3.7V, 18.5Wh
Use time:       about 10-12 hours, depending on the volume and brightness settings of the machine
Channel saving:    99 channels can be preset, preset radio station name, station frequency and demodulation mode
Body size:       136 x 74 x 22mm (L x W x H) (without protrusions)
Body weight:      about 310g (host only)

Receiver parameters

RF preamp gain:    fixed 20dB
Circuit Type:      Zero IF ZIF
Sideband suppression: ≥ 55dB

Test conditions:  50 ohm input impedance, preamp 20dB on, AGC on

Display control item list

Twelve items that can be selected by the encoder
1. Channel selection :       1-99
2. Frequency setting :       100k – 149MHz, minimum step 1Hz
3. Speaker volume(SPK) :      0 ~ 35dB, 1dB step
4. Earphone volume(EAR) :     0 ~ 35dB, 1dB step
5. Modulation :          CW, LSB, USB, AM, WFM, STE(FM stereo), I/Q
6. AGC setting :          OFF, SLOW, MID, FAST
7. Reference level(REF) :      -99 ~ 99dB, 1dB step
8. Backlight brightness(LCD) :   1% ~ 99%
9. IF GAIN :            -12 ~ 67dB, 1dB step
10. Spectrum style settings :     Green fill, Green line, Blue fill, White line
11. Spectrum bandwidth settings :  RF spectrum (192kHz, 128kHz, 64kHz) and Audio spectrum (64kHz)
12. Waterfall area settings:    Waterfall or Waveform (x1 / x8 / x64 amplitude)

Five items not selectable by the encoder
A. battery level display
B. date and time settings
C. radio information display: preset radio name capability
D. display of current spectrum bandwidth
E. (POWER) input power display

Receiver Block Diagram


This product realizes frequency mixing based on the Tayloe Quadrature Product Detector method. The clock generator Si5351 generates two quadrature square wave signals with variable frequency as excitation, and realizes an ultra-low noise ZIF zero-IF receiver. The IQ signal obtained after mixing is output to the CODEC and collected by the MCU, and the DSP algorithm in the MCU completes the demodulation and display of the signal.
Tayloe mixer references:
Ultra Low Noise, High Performance, Zero IF Quadrature Product Detector and Preamplifier
http://www.norcalqrp.org/files/Tayloe_mixer_x3a.pdf

Attention points

1. The machine adopts SDR architecture. If there is a strong broadcasting station near you, the phenomenon of mirror radio may appear.
2. The input impedance of the antenna interface is 50Ω. For the medium wave radio, it is recommended to connect a dedicated medium wave loop antenna for better listening effect.
3. Please pay attention to the volume setting of the earphone (EAR) before using the earphone to listen to avoid discomfort caused by excessive volume.

Supported frequency bands and coverage

Shipping list

1. DeepSDR101 4.3-inch screen unit x1
2. USB-A to USB Type-C cable x1
3. BNC rod antenna x1 (expanded length 70CM, closed length 14CM)
4. Quick Start Guide x1
5. 4.3 inch screen protector film 1
6. Foldable machine stand x1
7. Resistive screen touch pen x1
8. EVA material protective bag x1










About Firmware Upgrade

This unit supports firmware upgrades by users themselves. Firmware upgrades must first enter the removable disk mode.
1. Use the built-in TYPE-C data cable to connect the unit to the computer, and turn it on while pressing the encoder.
2. The machine will enter the removable disk mode, which will appear as a 1MB removable disk on the computer.
3. Copy the latest firmware to this removable disk, and restart the unit to complete the firmware upgrade automatically.
Follow the www.deepelec.com website for the latest firmware.
How to check the current firmware version?
Click the bottom of the screen to enter the version information display mode, as shown in the figure above.

  • 中文 (中国)中文 (中国)
  • EnglishEnglish

Tags

DeepSDR (2) DeepVNA (1) Firmware (11) NanoVNA-F (4) Radio (4) RF Demo Kit (1)

Contact us

Buy NOW ! : AliExpress Deepelec Store
Product Video :
www.youtube.com/@deepelec
Online forum :
NanoVNA-F Groups.io
NanoVNA-F Facebook group
DEEPELEC Groups.io
DEEPELEC Facebook group
Sales: sales@deepelec.com
Technical: support@deepelec.com

Recent Posts

  • DP-666 radio has been equipped with RTC 2025-04-09
  • DP-666 Megatron Touch Firmware 2.0.15mod16 released 2025-03-09
  • DP-666 third-party touch firmware testing 2024-09-08
  • DP-666 TEF6686 Radio Release 2024-09-07
  • DeepSDR 101 Receiver Firmware 1.0.1 released 2023-04-17

Archives

  • April 2025 (1)
  • March 2025 (1)
  • September 2024 (2)
  • April 2023 (1)
  • October 2022 (1)
  • August 2022 (2)
  • April 2022 (1)
  • March 2022 (1)
  • September 2021 (1)
  • May 2021 (1)
  • April 2021 (1)
  • September 2020 (1)
  • July 2020 (1)
  • March 2020 (1)
  • February 2020 (1)
  • January 2020 (1)
  • December 2019 (2)
  • November 2019 (2)

  • 1,037
  • 459
  • 2,040,209
  • 555,814

Authorized Distributor






广告

©2025 Hangzhou Minghong Electronic Technology Co., Ltd. | Powered by BH5HNU, Deepelec | 浙ICP备20021860号